What equipment do you need to start a metal polishing business?

There's an old expression stating that "a worker is only as good as his tools". That expression definitely applies to metal polishing. It should go without saying that multiple factors should be considered when purchasing your tools, such as price point, experience level, and personal preference.

Brian Arthur of Centex Polishing and Kevin Clapp of Texas Premier Polishing discuss what tools they prefer and recommend when you're looking to to get started in the polishing game.

MAKITA GA7021 - The best 6,000 RPM polishing machine which is generally used by professional or experienced metal polishers, this is truly the best quality you can get. 

MAKITA 9237C- The best 3,500 RPM polishing machine you can get which is used by both professional polishers and novice's due to its capabilities and build quality. You will 100% need a variable speed machine like this because when you are "coloring" or final finishing you will need to bring down your RPM speed to somewhere between 1,200 and 1,800 RPM's. Also if you decide to use our sanding wheels such as our 9" BLUE Buff & Blend or our 9" Satin Airway, you will need to sanding in the range of 1,200 RPM as anything faster is dangerous and runs the risk of actually damaging your work piece! 

Makita Random Orbital Sander  - These sanders are an absolute necessity in conjunction with our 5" hook & loop sanding discs which are used to sand out imperfections in your aluminum or stainless. An important thing to remember is that metal polishing with airways and buffing compound will NOT take out scratches or pitting. Any scratches or pitting will need to be removed with the sanding process! Typical grits that are most common with sanding when metal polishing are 220 grit, 320 grit & 400 grit. Our black polishing compound bar (stainless) or our Tripoli compound bar (for aluminum) in the cut stage can cut out and remove any 400 grit scratch marks, so going much finer than this is truly not necessary and causing double work for your polishing process. 

Buffing rake for metal polishing - Rakes are absolutely essential for metal polishing because they help to do two main things: One is break the buff in and open the threads on the end of the buff so compound can properly adhere to the wheel. The second is that you need to constantly rake out cakes up compound and metal fragments that inherently stick to the wheel. Too much of this build up can cause burns, dull shine and even scratches in the surface you are polishing. You absolutely NEED to buy a rake! 

Safety Flanges for metal polishing - Our safety flange plates have a 5/8" arbor that perfectly fit onto the shaft of a right angle grinder and are also an absolute necessity for metal polishing. Safety should be your number one concern because accidents can happen when you are working with high speed machinery like a right angle grinder spinning at 6,000 or 3,500 RPM's! 

Extension cords - Extension cords are important for operating right angle grinders as you don't want to get to a job and take an extension cord that doesn't have the right gauges or isn't meant to handle the power of a 3,500 rpm right angle grinder. Here are some GREAT ones we recommend:

FULL FACE RESPIRATOR - Safety First! you 100% should get one of these! 

Heavy Duty 100 Foot Extension cord for metal polishing machines & rotary's 

Heavy Duty 50 Foot Extension Cord for metal polishing machines & rotary's 

20 Ton Jack for big Rigs & heavy duty equipment 

20 Ton Air Jack for for big rigs and lifted trucks - LOVE THIS 

20 Ton Stubby jack for low axles

20 ton stubby air jack for low axles